Tiling Contractors in Johannesburg

Tiling in Johannesburg costs R200–R1,000+ per square metre fully installed in 2026, depending on tile type. Ceramic tiles are most affordable at R200–R400/m², porcelain costs R300–R600/m², and natural stone ranges from R500–R1,000+/m². Labour alone costs R120–R350/m². Bathroom tiling is R350–R600/m² due to waterproofing. We provide free quotes with tile recommendations.

Yes — waterproofing the floor and walls of a bathroom or shower before tiling is essential. Grout is not waterproof, and moisture will seep through to the slab below, causing structural damage, mould, and leaks. We apply cementitious or liquid membrane waterproofing to the shower floor, wall-floor junction, and walls up to 1.8 m in shower areas. This must cure before tiling begins.

Yes, in many cases you can tile over existing tiles if they are firmly bonded, level, and in good condition. We roughen the surface, apply a bonding primer, and use flexible tile adhesive. This saves the cost and mess of removing old tiles. However, if existing tiles are loose, hollow, or the floor level will become too high (affecting door clearance), removal is recommended. We assess during your quote.

Larger format tiles (600×600 mm or 600×1200 mm) with minimal grout joints create a sense of spaciousness because there are fewer visual breaks across the floor. Light colours and rectified (sharp-edged) tiles laid with thin grout lines enhance this effect. We recommend large-format porcelain for open-plan living areas and can advise on layout and colour during your consultation.

A standard bathroom (floor + walls) takes 3–5 days including waterproofing, tiling, and grouting. A full-house floor tiling project (100–150 m²) takes 5–10 days depending on tile size and layout complexity. Large-format tiles and straight-lay patterns are faster than small tiles or diagonal/herringbone patterns. We provide a timeline with every quote.